[Customer Information]
[Feedback]
Quarter turn fasteners helped everyone to tighten evenly and improved the work efficiency of the hand changeover.
[IMAO Product]
[Customer Information]
[Feedback]
Knob-Locking Pins helped to build an ergonomic production line to reduce the burden of workers and improve work efficiency.
[IMAO Product]
[Customer Information]
[Feedback]
Quarter turn fasteners provided quick and reliable fixture changing!
Only a quarter turn of the knob is much faster than tightening a wing screw and ON/OFF marking improves reliability of the operation.
[IMAO Product]
[Customer Information]
[Feedback]
One touch changeover made user-friendly evaporator. Our customers are satisfied with quick and easy changeover just by pushing the botton or turning the knob.
[IMAO Product]
[Customer Information]
[Feedback]
Standardized quick release fasteners cut fixture costs by 70% and eliminated fixture maintenance! There is no need to make and repair custom fasteners that were used before.
[IMAO Product]
[Customer Information]
[Feedback]
Fixture changeover that happens 10 times a day became simple and easy. Ball lock fastners provide quick change of pushing pad, holders and guides just by pushing the button. One tuch operation reduced not only setup time but also operator's workload.
[IMAO Product]
[Customer Information]
[Feedback]
Setup time of nipper unit was reduced from 15 min to 1 min thanks to simple and quick operation of quarter turn fasteners! Visible locking condition by ON/OFF marking increased safety of the factory.
[IMAO Product]
[Customer Information]
[Feedback]
Fixture setup time was shortened by half compared to previous clamping with screws or knobs. Just turning the knob 1/4 turn made fixture changeover faster and easier to hold multiple workpieces.
[IMAO Product]
[Customer Information]
[Feedback]
Nutrunner Clamps helped to share the FMS line for different workpieces and the production volume increased tenfold.
[IMAO Product]
[Customer Information]
[Feedback]
The Pull Clamping System can position the workpiece and provide easy clamping without tool interference, enabling 5-sided machining. 105 minutes of setup time has been reduced to 25 minutes.
[IMAO Product]
[Customer Information]
[Feedback]
The same fixture can mount on vertical, horizontal and 5 axis machining centers. It provided more flexible production and shorter lead time.
[IMAO Product]
[Customer Information]
[Feedback]
Fixture changing time was eliminated by this quick change fixturing system. The locating repeatability is much better than our requirement.
[IMAO Product]
[Customer Information]
[Feedback]
We made a dedicated fixture and fixed it with a vise for clamping a large number of workpieces which used to be clamped individually with a vise. This fixture can hold two workpieces with one clamp, and has succeeded in placing a large number of workpieces in a limited space.
[IMAO Product]
[Customer Information]
[Feedback]
With Imao's BJ360 Work Support, the time-consuming setup task of anti-vibration has become easier and tool-less.
[IMAO Product]
[Customer Information]
[Feedback]
Workpiece can be located accurately by inserting spring loaded tapered pins into casting holes.
[IMAO Product]
[Customer Information]
[Feedback]
Clamping with vises or side clamps was difficult and complicated. ID clamping provided easy and simple workholding.
[IMAO Product]
[Customer Information]
[Feedback]
Simple design without tool interference provided 5-axis machining. Sufficient clamping force allowed unmanned operation with security.
[IMAO Product]
[Customer Information]
[Feedback]
Flex Zero Base enabled to complete the fixture changes within 30 seconds with high accuracy and easy operation, improving the machine operating rate.
[IMAO Product]
[Customer Information]
[Feedback]
Flex Zero Base reduced the setup time from 20 minutes to 5 minutes by automating the centering process of the fixtures.
[IMAO Product]
[Customer Information]
[Feedback]
Compact design enabled multiple-parts holding. Secure clamping increased machining accuracy.
[IMAO Product]
[Customer Information]
[Feedback]
Compact design enabled multiple-parts holding. Easy operation eliminated 50% of workpiece loading/unloading time. High clamping force reduced defective rate.
[IMAO Product]
[Customer Information]
[Feedback]
Size of workpiece material was minimized because of changing from vertical clamp to horizontal.
[Customer Information]
[Feedback]
High durability eliminated cumbersome maintenance of clamps. Toggle clamps that they had used in the past had been worn out every two months. One-touch operation reduced workpiece loading/unloading time.
[IMAO Product]
[Customer Information]
[Feedback]
Compact design enabled multiple-parts holding. Extremely low profile clamping slashed material height.
[IMAO Product]
[Customer Information]
[Feedback]
Compact design enabled multiple-parts holding. Fixturing cost was reduced dramatically.
[IMAO Product]
[Customer Information]
[Feedback]
Cumbersome height adjustment of jack was eliminated and workpiece setup time was reduced.
[IMAO Product]
[Customer Information]
[Feedback]
Swivel tip holds the tapered surface securely.
[IMAO Product]
[Customer Information]
[Feedback]
One-touch operation reduced workpiece loading/unloading time. Strong clamping held the workpiece securely in heavy duty machining.
[IMAO Product]
[Customer Information]
[Feedback]
One-touch operation reduced workpiece loading/unloading time. Low profile clamping enabled holding a workpiece 3mm thick.
[IMAO Product]
[Customer Information]
[Feedback]
Easy tightening operation reduced workpiece loading/unloading time.
[IMAO Product]
[Customer Information]
[Feedback]
Simple workholding enabled to complete 4 machining processes at a time.
[IMAO Product]
